Electronics

Top Best Cordless Hammer Drills Reviews 2022

Cordless hammer drills allow you to take your power tool with you wherever you go. Because of their convenience, portability, and on-site safety, they are the drill of choice in the construction industry.

So, if they’re good enough for professionals, they’re ideal for do-it-yourselfers.

With that in mind, we bring you 10 of the best cordless hammer drills currently on the market.

The Best Cordless Hammer Drills – Reviews 2022

We’ve compiled a list of the top ten best cordless hammer drills that we believe stand out from the crowd.

1. Makita XPH03Z Drill

Simply put, light-duty hammer drills must still drive the point home, and the Makita XPH03Z does just that. This model has a 1/2-inch 3-jaw chuck, dual-LED lights, and plenty of speed and BPM options. This drill produces up to 2,000 RPM and a BPM speed of up to 30,000, allowing you to effectively tackle light-duty jobs like drilling through wall tile and grout lines. This Makita produces up to 750 inch-pounds of torque, or approximately 62 foot-pounds.

Despite the fact that this is a light-duty hammer drill, it comes with a side handle to improve grip and control, as well as a depth-stop to prevent you from crashing the chuck into your work surface when your bit is all the way through. This is a tool-only purchase, but a 2-pack of Makita 3.0Ah batteries can be purchased separately (available here). This lightweight Makita drill weighs slightly more than 5.1 pounds with these batteries.

Buy Now from Amazon

2. WESCO Brushless Drill

When it comes to power and specs, this Wesco cordless drill is the best and isn’t far behind larger contactor grade drills from Makita and DeWalt.

This combo drill has an impressive 60Nm of torque, 2,000 RPM, and 32,000 blows per minute, allowing it to easily drill through masonry.

All of this power is delivered by a brushless motor, which is extremely uncommon on a drill at this price point. Brushless motors are more efficient and last longer than brushed motors. It is simple to use and handle, even with all of its power and ergonomic design.

It includes a 2.0Ah battery, a 1 hour charger, and a variety of drill and screwdriver bits. If you are a professional contractor looking for a spare combi drill with specs similar to your main drill for less than £100, you cannot go wrong with the WESCO drill.

Check Price

3. Bosch PSB 1800 Combi Drill

This PSB 18V Combi Drill has a maximum torque of 39Nm, which is comparable to the Black + Decker 18V drill, and is suitable for a wide range of drilling, driving, and impacting/hammering tasks. It is manufactured by Bosch, another well-known and well-respected name in the field of household tools.

One unique feature of this drill is its built-in Syneon Chip technology, which intelligently controls the amount of energy in your drill to deliver optimum power and endurance for your tasks (we’re not sure how this works either, but it sounds good!)

The PSB has a 2-speed gearbox and 20 pre-selectable settings, giving you complete control over the drilling torque. It’s lightweight and compact, with a built-in light and carry case for convenient storage and portability.

It also includes two 18V batteries and a charger, and it is compatible with all Bosch 18V tools. The charging time is quick – you can expect the battery to be fully charged in under an hour.

One of the best features of this drill is the second battery, which allows you to use it almost continuously by always having one battery charged and ready to be swapped in as soon as the current one runs out. This makes it an excellent choice for longer DIY projects.

Check Price

4. Dewalt DEWDCD706D2 Drill

Another tool that is extremely light and compact – but it is one of the most important aspects, as you don’t want to be lugging around anything too heavy. The term “brushless” refers to the brushless motor, which is said to provide 15% more runtime than previous models.

As a combi hammer drill, the attached hammer mechanism is useful for drilling into stone, so this model may appeal to masons. Grant also praises the highly ergonomic handle for its comfort and control. It provides consistent screw driving into a variety of materials thanks to an LED light, easy battery-level checks, and a 15-position adjustable torque control.

This one isn’t cheap, so we can’t recommend it to everyone, but it is unquestionably a high performer.

Check Price

5. Blue Ridge 20 V Max Cordless Combi Drill

Blue Ridge, a member of the Positec family that includes brands such as Worx and Rockwell, specialises in battery-powered power tools that offer premium features without the premium price tag. One of the best budget combi drills I’ve tried so far is their 20V cordless offering.

If you’re looking for the best combi drill for DIY tasks but don’t require a professional-level tool, this is an excellent addition to your home tool kit. The overall appearance of the drill isn’t as high-end as the Makita, but when you consider the price, you can see why. The large TPE grips, on the other hand, have a positive rubber finish that will keep it in your hand no matter what.

The two selectable gears produce 400–1500 rpm, the maximum torque is 42 Nm, and with a hammer mode bpm of 24,000, this is no shrinking violet when it comes to drilling holes in masonry. Wood can be drilled to a capacity of 35 mm, while metal and concrete can be drilled to a capacity of 13 mm.

The number of accessories included distinguishes this as one of the best cordless drills for beginners. This isn’t just a “bare” drill; it’s an entire set for any aspiring DIYer who wants to get started right away. Two 15 Ah batteries, a set of common screwdriver bits and a magnetic bit holder, various sizes of masonry and HSS bits, and even a flexible drive shaft have been included.

Check Price

6. WORX WX390 20V

This drill is a 3-in-1 tool with a powerful pneumatic hammer mechanism that allows it to be used for screwing, drilling, and hammering jobs. This drill, which is powered by a 20V lithium-ion battery, has an ergonomic design that allows users to have a perfect grip and better control for tough jobs.

Worx WX390 is a fantastic cordless drill that is extremely efficient at drilling, driving screws, and impact drilling. It also has a fatigue-free design, making it a very reliable tool, especially for larger projects. It is one of the best cordless drills on the market today, thanks to its long battery life and sophisticated mechanism.

Check Price

7. HiKOKI DV18DBFL2/JM 18V

Other drills offer more Amp hours (Ah), higher speeds, and better torque than our multiple winner. However, the HiKOKI continues to provide the best combination of all factors. It has plenty of power, but we’d like to see more than two battery-powered LEDs. The specs include 70Nm of torque, a large case, a base-mounted light, a no-load speed of 1,800 rpm, and 22 torque settings. It breezed through our tests, and its low price gives it an advantage over its closest competitors.

Check Price

8. Ryobi RAD1801M Right Angle Drill

This unusual drill is intended for drilling and screwdriving in difficult-to-reach areas.

The RAD1801M came in handy for our tester when screwing shelves into supporting battens in a small cupboard. This is just one of the many tight scrapes that a cleverly designed right-angle drill could assist a DIYer in escaping. On the surface, this doesn’t appear to be the most important tool – but that quickly changes when you find yourself in a situation where you can’t get your regular combi drill aligned with whatever you’re drilling into.

The RAD1801utility M’s extends beyond working in confined spaces. We also discovered that it provided far better visibility of the work we were doing than a standard combi drill, where the body of the tool tends to get in the way. We were able to drill straight and accurately as a result of this.

Given its design, this drill does not have a hammer drill mode, so keep in mind that it is primarily intended for driving screws or drilling into wood or metal.

Check Price

9. Milwaukee M18FPD-0

Milwaukee is yet another high-end power tool manufacturer, with products geared towards heavy-duty users. As a result, this drill packs a punch and should make quick work of even the most difficult tasks, but thanks to its brushless motor assembly, it weighs in at a manageable 2.1kg.

If you register online, you’ll receive a three-year warranty, similar to what DeWalt offers. This drill does not come with a charger or battery, but both can be purchased online.

Check Price

10. Bosch EasyImpact 550 Hammer Drill

The EasyImpact 550 from Bosch, with its clean and ergonomic design, is one to consider for both DIY novices and professionals.

The lightweight hammer drill weighs only 1.5kg, making it easy to control, and the added impact mechanism ensures it does the job effortlessly and in less time than most on the market.

The drill is simple to use and ready in a matter of seconds thanks to an anti-slip handle and a 2-sleeve chuck.

Check Price

How To Choose The Best Cordless Hammer Drills?

This guide should be helpful to you. I’ve listed my top five picks for a cordless hammer drill above. However, if you want to know more about what to look for before making a purchase, this buyer’s guide should be useful.

The Actual Hammer Action

It goes without saying that the first thing you should look for is the hammer action. This will always be listed as a feature because it is the only function that will allow you to pass through concrete and masonry.

Normally, this is measured in bumps per second (bps) The easiest thing to look out for is that the more bumps there are, the better. A typical drill has a rotary spinning action. This is expressed as revolutions per minute (rpm). The majority of drills will then have variable speeds. These various speeds are used to drill through various types of material.

This revolving or spinning function is also available in hammer drills. When the hammer function is activated, it performs a rotary drilling action as well as a bumping action similar to a very fast hammer. The combination of these two actions allows you to drill through walls and masonry.

Battery Power for Hammer Action Drills

As long as you have a hammer feature, the next most important thing to look for is battery size and charge. The most common is an 18 Volt battery. Lithium-Ion batteries are far superior to older NiCad batteries, but they are more expensive. Li-Ion batteries also charge faster and retain or hold their charge for a much longer period of time.

The battery provides direct power for your drilling. The greater the size, the better. The 14.4 Volt option is the smallest you should choose, but an 18 Volt or 20 Volt option is even better.

Chuck Size for a Hammer Drill

The majority of these cordless hammer drills will have a 10 mm chuck. That means a drill bit with a diameter of 10 mm can be inserted. That is usually sufficient for most masonry drilling. It is ideal for drilling holes for wall plugs and other similar purposes. You can also get 12 mm chucks, which allow you to hold larger drill bits.

You will only need to upgrade to that if you intend to do a lot of heavy duty drilling. The 10 mm chuck size is usually adequate for almost all home and garden tasks.

Finals Thoughts and Final Conclusion

Cordless Hammer Drills are essential tools for both DIY enthusiasts, home users, and professional tradespeople. They differ greatly in terms of price, style, and features.

You simply need to look around and determine which one is best for you. Remember that all of the essential features are present on our Top Recommended Models, making it that much easier to choose the right model.

Consider what you need it for and how much you are willing to spend; once you have decided on a price range, the rest is simple because all of the models on our top list are the ‘cream of the crop’.

The only thing we would suggest is that if your budget allows, you consider purchasing a model with a brushless motor for added reliability.

Leave a Reply

Your email address will not be published. Required fields are marked *